Complaints & Recalls
Official Safety Recalls - Important!
23 RecallsThese are official manufacturer recalls ordered by NHTSA for safety defects. If you own this vehicle, contact your dealer immediately for free repairs.
Chrysler (fca Us, Llc)
Safety Issue:
Chrysler (FCA US, LLC) is recalling certain 2016-2019 Ram 3500, Ram 1500, 2016-2020 Ram 2500, and 2016 Ram 3500 Cab Chassis vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Mfg Campaign: 05C, 09C, 10C
Recall Date: Jan 16, 2025
Chrysler (fca Us, Llc)
Safety Issue:
Chrysler (FCA US, LLC) is recalling certain 2015-2020 Ram 1500 Classic, 2015-2016 Ram 3500, and Ram 2500 vehicles, and 2016 Ram 3500 Cab Chassis with a gross vehicle weight rating less than 10,000 lbs. The side air bag inflatable curtain (SABIC) inflator end cap may detach from the inflator, or the inflator sidewall may rupture.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: Y55
Recall Date: Aug 12, 2021
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain 2015-2017 Ram 1500, 2500 and 3500 pickup trucks equipped with an 8 foot bed and a power locking tailgate. Chrysler is also recalling all 2013-2014 and 2018 Ram 1500, 2500 and 3500 pickup trucks built before April 1, 2018 with a 6 or 8 foot bed and a power locking tailgate. On August 29, 2019 Chrysler expanded the recall to include an additional 693,128 model year 2013-2014 Ram 1500, 2500 and 3500 pickup trucks. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: V44
Recall Date: May 9, 2019
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain 2013-2018 Ram 3500 and 2014-2018 Ram 3500 Chassis Cab and Ram 2500 vehicles. The outboard steering linkage jam nut may loosen, allowing one end of the drag link to separate.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: V06
Recall Date: Jan 25, 2019
Streetcar Orv Llc
Safety Issue:
Streetcar ORV LLC (Streetcar) is recalling certain American Expedition Vehicles (AEV) 3" Dualsport aftermarket suspension kits, part numbers N0436000 and N0436001, sold for installation on 2013-2018 RAM 2500 and 3500HD trucks. Improper installation and machining of the original equipment steering knuckle may weaken the joint between the steering drag link and knuckle.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Date: Oct 16, 2018
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain 2015-2017 RAM 1500, 2500, and 3500 pickup trucks equipped with a power locking tailgate and either a 5 foot, 7 inch or 6 foot, 4 inch bed. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: U74
Recall Date: Jul 27, 2018
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: U49,U59-U65,U68,U73
Recall Date: May 17, 2018
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: T82
Recall Date: Dec 21, 2017
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: T79
Recall Date: Dec 20, 2017
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain 2013-2017 RAM 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, equipped with Cummins 6.7L Turbo Diesel engines that have Concentric-brand water pumps without a vent hole. These water pumps may leak coolant.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: T51
Recall Date: Sep 12, 2017
Streetcar Orv Llc
Safety Issue:
Streetcar ORV LLC, dba American Expedition Vehicles (AEV) is recalling certain 2013-2017 RAM 2500 and 3500 heavy duty trucks, modified by AEV to be equipped with cast aluminum Katla 8.5" road wheels. The outer surface of the wheel may fracture, resulting in rapid air loss.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Date: Aug 10, 2017
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain model year 2013-2016 Ram 1500, Ram 2500, and 2014-2016 Ram 3500 vehicles. Certain driving conditions, such as driving off-road or debris striking the vehicle may cause the roll rate sensor to trigger a fault within the Occupant Restraint Controller (ORC). If this fault occurs, the rollover side curtain air bag and the seat belt pretensioner will be disabled from deploying.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: T25
Recall Date: May 9, 2017
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling aftermarket Mopar Canvas Seat Covers for certain 2012-2016 RAM 1500, 2500, and 3500 trucks. These Mopar canvas seat covers were sold through Chrysler dealerships beginning October 15, 2015. The seat covers can impede the deployment of the seat thorax airbags.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: S30
Recall Date: May 16, 2016
Chrysler (fca Us Llc)
Safety Issue:
Chrysler (FCA US LLC) is recalling certain model year 2016 Ram 2500, 3500, 3500 Cab Chassis and 4500/5500 Cab Chassis trucks manufactured July 31, 2015, to August 13, 2015 and equipped with a 6.7L Cummins Diesel engine. In the affected vehicles, the Engine Control Module (ECM) may short circuit, causing the engine to stall without warning.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: R52
Recall Date: Sep 23, 2015
Consumer Complaints
347 ComplaintsChrysler (fca Us, Llc)
Defect Description:
FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
Potential Consequences:
When vehicles comes to a stop or a slow roll. It makes a loud humming sound and cuts off in drive. The lights starts flickering ans The check engine flashes on at that time. Received a ecm code.I have to place in park and restart. Happens 70% of the time in drive and other times in reverse or park. Cruise control would not turn on. If on will not turn off with buttons
Corrective Action:
When vehicles comes to a stop or a slow roll. It makes a loud humming sound and cuts off in drive. The lights starts flickering ans The check engine flashes on at that time. Received a ecm code.I have to place in park and restart. Happens 70% of the time in drive and other times in reverse or park. Cruise control would not turn on. If on will not turn off with buttons
Additional Notes:
When vehicles comes to a stop or a slow roll. It makes a loud humming sound and cuts off in drive. The lights starts flickering ans The check engine flashes on at that time. Received a ecm code.I have to place in park and restart. Happens 70% of the time in drive and other times in reverse or park. Cruise control would not turn on. If on will not turn off with buttons
Mfg Campaign: 11505608
Recall Date: Feb 4, 2023
Chrysler (fca Us, Llc)
Defect Description:
TIRES:TREAD/BELT
Potential Consequences:
Truck started shaking like a tire was out of round. Right front tire had separation (several large bubbles on the inside of the tire). I replaced that tire with a spare of a different brand. About 2 weeks later the left rear tire had the same issue. These tires are less than 1 year old and have less then 15,000 miles. I do not trust these tires any more and replaced them at significant cost.
Corrective Action:
Truck started shaking like a tire was out of round. Right front tire had separation (several large bubbles on the inside of the tire). I replaced that tire with a spare of a different brand. About 2 weeks later the left rear tire had the same issue. These tires are less than 1 year old and have less then 15,000 miles. I do not trust these tires any more and replaced them at significant cost.
Additional Notes:
Truck started shaking like a tire was out of round. Right front tire had separation (several large bubbles on the inside of the tire). I replaced that tire with a spare of a different brand. About 2 weeks later the left rear tire had the same issue. These tires are less than 1 year old and have less then 15,000 miles. I do not trust these tires any more and replaced them at significant cost.
Mfg Campaign: 11497118
Recall Date: Dec 12, 2022
Chrysler (fca Us, Llc)
Defect Description:
SERVICE BRAKES
Potential Consequences:
In March of 2022 my ABS/Traction Control light illuminated and returned a code of "Internal Electrical Failure". I have had this evaluated by two different dealers with two different pieces being blamed. One is the ABS Contril Module and the other is the Hydraulic Control Unit. I have replaced both multiple times without any remedy. The dealer stating that is was the ABS Control Module told me multiple times that they cannot even order the part to fix it. This means I cannot get a state inspection sticker on my primary mode of transportation as well as not having working ABS brakes, traction control, and cruise control. This is a concern with my family being safe as well as when towing my 5th wheel rv. There is an open investigation for 2017-2018 but my truck is a 2016 with the same issue. There are multiple people on forums with Rams other than the 2017-18 trucks with this same exact problem. A lot of us are using vehicles that are not able to be inspected with safety equipment not functioning correctly.
Corrective Action:
In March of 2022 my ABS/Traction Control light illuminated and returned a code of "Internal Electrical Failure". I have had this evaluated by two different dealers with two different pieces being blamed. One is the ABS Contril Module and the other is the Hydraulic Control Unit. I have replaced both multiple times without any remedy. The dealer stating that is was the ABS Control Module told me multiple times that they cannot even order the part to fix it. This means I cannot get a state inspection sticker on my primary mode of transportation as well as not having working ABS brakes, traction control, and cruise control. This is a concern with my family being safe as well as when towing my 5th wheel rv. There is an open investigation for 2017-2018 but my truck is a 2016 with the same issue. There are multiple people on forums with Rams other than the 2017-18 trucks with this same exact problem. A lot of us are using vehicles that are not able to be inspected with safety equipment not functioning correctly.
Additional Notes:
In March of 2022 my ABS/Traction Control light illuminated and returned a code of "Internal Electrical Failure". I have had this evaluated by two different dealers with two different pieces being blamed. One is the ABS Contril Module and the other is the Hydraulic Control Unit. I have replaced both multiple times without any remedy. The dealer stating that is was the ABS Control Module told me multiple times that they cannot even order the part to fix it. This means I cannot get a state inspection sticker on my primary mode of transportation as well as not having working ABS brakes, traction control, and cruise control. This is a concern with my family being safe as well as when towing my 5th wheel rv. There is an open investigation for 2017-2018 but my truck is a 2016 with the same issue. There are multiple people on forums with Rams other than the 2017-18 trucks with this same exact problem. A lot of us are using vehicles that are not able to be inspected with safety equipment not functioning correctly.
Mfg Campaign: 11497168
Recall Date: Dec 12, 2022
Chrysler (fca Us, Llc)
Defect Description:
SUSPENSION
Potential Consequences:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Corrective Action:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Additional Notes:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Mfg Campaign: 11493947
Recall Date: Nov 17, 2022
Chrysler (fca Us, Llc)
Defect Description:
STEERING
Potential Consequences:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Corrective Action:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Additional Notes:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Mfg Campaign: 11493947
Recall Date: Nov 17, 2022
Chrysler (fca Us, Llc)
Defect Description:
UNKNOWN OR OTHER
Potential Consequences:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Corrective Action:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Additional Notes:
In 2020, Dodge repaired a recall by welding the steering linkage nut to the drag link. This recall (V06) prohibits me to have the vehicle aligned by a tire repair/replacement shop. Additionally, the ability to align the vehicle relies on the dealer to break the weld, replace the nut and re-weld the part. This repetitive process in turn causes metal fatigue to the drive link, presenting another MAJOR safety concern. If the drive link were to fail, I would lose steering control and crash without warning. I have contacted Dodge directly and requested they replace the drive link on my vehicle to remedy this problem, however, they have refused. The cost to replace the drive link and re-align the vehicle (required after part replacement) is approximately $1,100. Much less money than would be paid out for a catastrophic fatality(ies) resulting from the failure of this part.
Mfg Campaign: 11493947
Recall Date: Nov 17, 2022
Chrysler (fca Us, Llc)
Defect Description:
FUEL/PROPULSION SYSTEM
Potential Consequences:
The contact owns a 2016 Ram 2500. The contact stated while driving at 65 MPH, the contact smelled a strong odor of gasoline and the contact felt the vehicle losing power. In addition, the contact noticed smoke coming from the rear of the vehicle, and no warning lights illuminated on the instrument panel. The contact placed a rubber line on the fuel line because he noticed the fuel line was rubbing against the frame of the vehicle causing the fuel line to wear. The vehicle was not diagnosed. The manufacturer was contacted, and a case was filed. The failure mileage was 87,000.
Corrective Action:
The contact owns a 2016 Ram 2500. The contact stated while driving at 65 MPH, the contact smelled a strong odor of gasoline and the contact felt the vehicle losing power. In addition, the contact noticed smoke coming from the rear of the vehicle, and no warning lights illuminated on the instrument panel. The contact placed a rubber line on the fuel line because he noticed the fuel line was rubbing against the frame of the vehicle causing the fuel line to wear. The vehicle was not diagnosed. The manufacturer was contacted, and a case was filed. The failure mileage was 87,000.
Additional Notes:
The contact owns a 2016 Ram 2500. The contact stated while driving at 65 MPH, the contact smelled a strong odor of gasoline and the contact felt the vehicle losing power. In addition, the contact noticed smoke coming from the rear of the vehicle, and no warning lights illuminated on the instrument panel. The contact placed a rubber line on the fuel line because he noticed the fuel line was rubbing against the frame of the vehicle causing the fuel line to wear. The vehicle was not diagnosed. The manufacturer was contacted, and a case was filed. The failure mileage was 87,000.
Mfg Campaign: 11488811
Recall Date: Oct 11, 2022
Chrysler (fca Us, Llc)
Defect Description:
STEERING
Potential Consequences:
My 2016 RAM has very loose steering and has almost caused me an accident several times due to my lack of control of the steering. The steering stabilizer jam nuts have been welded to the adjuster sleeve (as the referenced recalls below suggest as a fix) but the entire assembly rotates freely by hand! I am constantly having to get alignments to help control my steering, however, it seems to be getting worse and I am having to do alignments more often. Now, recall numbers 19V021000 and 18E096000 both refer to this problem for select RAM 2500s however, for some reason my VIN is not connected to this recall although it is obvious that it has been implemented on my truck. I bought my truck in 2018 used from a dealership. All the recalls that were indicated on my truck at the time were implemented, but so was the welding of the jam nuts even though my VIN doesn't reflect this recall action. I have an appointment with my Chrysler dealership this Thursday, but they told me that there probably wasn't much that they could do without the recall being attached to my VIN. This is currently my only vehicle and I am cautious and scared every time I drive it now since there is no warning as to when the steering loosens up and the truck seems to drive diagonally vice straight. I would greatly appreciate some help in this matter.
Corrective Action:
My 2016 RAM has very loose steering and has almost caused me an accident several times due to my lack of control of the steering. The steering stabilizer jam nuts have been welded to the adjuster sleeve (as the referenced recalls below suggest as a fix) but the entire assembly rotates freely by hand! I am constantly having to get alignments to help control my steering, however, it seems to be getting worse and I am having to do alignments more often. Now, recall numbers 19V021000 and 18E096000 both refer to this problem for select RAM 2500s however, for some reason my VIN is not connected to this recall although it is obvious that it has been implemented on my truck. I bought my truck in 2018 used from a dealership. All the recalls that were indicated on my truck at the time were implemented, but so was the welding of the jam nuts even though my VIN doesn't reflect this recall action. I have an appointment with my Chrysler dealership this Thursday, but they told me that there probably wasn't much that they could do without the recall being attached to my VIN. This is currently my only vehicle and I am cautious and scared every time I drive it now since there is no warning as to when the steering loosens up and the truck seems to drive diagonally vice straight. I would greatly appreciate some help in this matter.
Additional Notes:
My 2016 RAM has very loose steering and has almost caused me an accident several times due to my lack of control of the steering. The steering stabilizer jam nuts have been welded to the adjuster sleeve (as the referenced recalls below suggest as a fix) but the entire assembly rotates freely by hand! I am constantly having to get alignments to help control my steering, however, it seems to be getting worse and I am having to do alignments more often. Now, recall numbers 19V021000 and 18E096000 both refer to this problem for select RAM 2500s however, for some reason my VIN is not connected to this recall although it is obvious that it has been implemented on my truck. I bought my truck in 2018 used from a dealership. All the recalls that were indicated on my truck at the time were implemented, but so was the welding of the jam nuts even though my VIN doesn't reflect this recall action. I have an appointment with my Chrysler dealership this Thursday, but they told me that there probably wasn't much that they could do without the recall being attached to my VIN. This is currently my only vehicle and I am cautious and scared every time I drive it now since there is no warning as to when the steering loosens up and the truck seems to drive diagonally vice straight. I would greatly appreciate some help in this matter.
Mfg Campaign: 11485554
Recall Date: Sep 20, 2022
Chrysler (fca Us, Llc)
Defect Description:
SUSPENSION
Potential Consequences:
My 2016 RAM has very loose steering and has almost caused me an accident several times due to my lack of control of the steering. The steering stabilizer jam nuts have been welded to the adjuster sleeve (as the referenced recalls below suggest as a fix) but the entire assembly rotates freely by hand! I am constantly having to get alignments to help control my steering, however, it seems to be getting worse and I am having to do alignments more often. Now, recall numbers 19V021000 and 18E096000 both refer to this problem for select RAM 2500s however, for some reason my VIN is not connected to this recall although it is obvious that it has been implemented on my truck. I bought my truck in 2018 used from a dealership. All the recalls that were indicated on my truck at the time were implemented, but so was the welding of the jam nuts even though my VIN doesn't reflect this recall action. I have an appointment with my Chrysler dealership this Thursday, but they told me that there probably wasn't much that they could do without the recall being attached to my VIN. This is currently my only vehicle and I am cautious and scared every time I drive it now since there is no warning as to when the steering loosens up and the truck seems to drive diagonally vice straight. I would greatly appreciate some help in this matter.
Corrective Action:
My 2016 RAM has very loose steering and has almost caused me an accident several times due to my lack of control of the steering. The steering stabilizer jam nuts have been welded to the adjuster sleeve (as the referenced recalls below suggest as a fix) but the entire assembly rotates freely by hand! I am constantly having to get alignments to help control my steering, however, it seems to be getting worse and I am having to do alignments more often. Now, recall numbers 19V021000 and 18E096000 both refer to this problem for select RAM 2500s however, for some reason my VIN is not connected to this recall although it is obvious that it has been implemented on my truck. I bought my truck in 2018 used from a dealership. All the recalls that were indicated on my truck at the time were implemented, but so was the welding of the jam nuts even though my VIN doesn't reflect this recall action. I have an appointment with my Chrysler dealership this Thursday, but they told me that there probably wasn't much that they could do without the recall being attached to my VIN. This is currently my only vehicle and I am cautious and scared every time I drive it now since there is no warning as to when the steering loosens up and the truck seems to drive diagonally vice straight. I would greatly appreciate some help in this matter.
Additional Notes:
My 2016 RAM has very loose steering and has almost caused me an accident several times due to my lack of control of the steering. The steering stabilizer jam nuts have been welded to the adjuster sleeve (as the referenced recalls below suggest as a fix) but the entire assembly rotates freely by hand! I am constantly having to get alignments to help control my steering, however, it seems to be getting worse and I am having to do alignments more often. Now, recall numbers 19V021000 and 18E096000 both refer to this problem for select RAM 2500s however, for some reason my VIN is not connected to this recall although it is obvious that it has been implemented on my truck. I bought my truck in 2018 used from a dealership. All the recalls that were indicated on my truck at the time were implemented, but so was the welding of the jam nuts even though my VIN doesn't reflect this recall action. I have an appointment with my Chrysler dealership this Thursday, but they told me that there probably wasn't much that they could do without the recall being attached to my VIN. This is currently my only vehicle and I am cautious and scared every time I drive it now since there is no warning as to when the steering loosens up and the truck seems to drive diagonally vice straight. I would greatly appreciate some help in this matter.
Mfg Campaign: 11485554
Recall Date: Sep 20, 2022
Chrysler (fca Us, Llc)
Defect Description:
ELECTRICAL SYSTEM
Potential Consequences:
The contact owns a 2016 Ram 2500. The contact stated that while slowing down for traffic or traffic signals at approximately 10 MPH, the vehicle would stall. The contact stated no warning light was illuminated. The contact stated that several attempts were needed to restart the vehicle. The failure became constant and the vehicle had to be towed to a dealer. The contact had taken the vehicle to the same local dealer several times for the same failure. The dealer had diagnosed the failure and determined that the vehicle needed to have the Totally Integrated Power Module (TIPM-7) bypassed to a new TIPM relay. The vehicle had not been repaired. The manufacturer had not been informed of the failure. The contact researched online and related the failure to NHTSA Campaign Number: 14V530000 (Electrical System). The failure mileage was approximately 125,000.
Corrective Action:
The contact owns a 2016 Ram 2500. The contact stated that while slowing down for traffic or traffic signals at approximately 10 MPH, the vehicle would stall. The contact stated no warning light was illuminated. The contact stated that several attempts were needed to restart the vehicle. The failure became constant and the vehicle had to be towed to a dealer. The contact had taken the vehicle to the same local dealer several times for the same failure. The dealer had diagnosed the failure and determined that the vehicle needed to have the Totally Integrated Power Module (TIPM-7) bypassed to a new TIPM relay. The vehicle had not been repaired. The manufacturer had not been informed of the failure. The contact researched online and related the failure to NHTSA Campaign Number: 14V530000 (Electrical System). The failure mileage was approximately 125,000.
Additional Notes:
The contact owns a 2016 Ram 2500. The contact stated that while slowing down for traffic or traffic signals at approximately 10 MPH, the vehicle would stall. The contact stated no warning light was illuminated. The contact stated that several attempts were needed to restart the vehicle. The failure became constant and the vehicle had to be towed to a dealer. The contact had taken the vehicle to the same local dealer several times for the same failure. The dealer had diagnosed the failure and determined that the vehicle needed to have the Totally Integrated Power Module (TIPM-7) bypassed to a new TIPM relay. The vehicle had not been repaired. The manufacturer had not been informed of the failure. The contact researched online and related the failure to NHTSA Campaign Number: 14V530000 (Electrical System). The failure mileage was approximately 125,000.
Mfg Campaign: 11476216
Recall Date: Jul 27, 2022
Chrysler (fca Us, Llc)
Defect Description:
SUSPENSION
Potential Consequences:
Broke suspension on a pothole. After repair, Alignment shop would not align vehicle because Ram welded the Drag Link as part of their V06 recall so that it was no longer adjustable. Being that this is my primary vehicle, I had to purchase a new drag link so that my steering could be readjusted as well as have my tires wear properly. I asked Ram for Refund on this repair , but they responded that in order to get a refund, I would have had to be towed to a Ram dealership on my own dime, then wait for an official Ram part to come in which would cost me hundreds of dollars in rental cars and tow bills for an adjustable part that they welded to make non adjustable.
Corrective Action:
Broke suspension on a pothole. After repair, Alignment shop would not align vehicle because Ram welded the Drag Link as part of their V06 recall so that it was no longer adjustable. Being that this is my primary vehicle, I had to purchase a new drag link so that my steering could be readjusted as well as have my tires wear properly. I asked Ram for Refund on this repair , but they responded that in order to get a refund, I would have had to be towed to a Ram dealership on my own dime, then wait for an official Ram part to come in which would cost me hundreds of dollars in rental cars and tow bills for an adjustable part that they welded to make non adjustable.
Additional Notes:
Broke suspension on a pothole. After repair, Alignment shop would not align vehicle because Ram welded the Drag Link as part of their V06 recall so that it was no longer adjustable. Being that this is my primary vehicle, I had to purchase a new drag link so that my steering could be readjusted as well as have my tires wear properly. I asked Ram for Refund on this repair , but they responded that in order to get a refund, I would have had to be towed to a Ram dealership on my own dime, then wait for an official Ram part to come in which would cost me hundreds of dollars in rental cars and tow bills for an adjustable part that they welded to make non adjustable.
Mfg Campaign: 11475058
Recall Date: Jul 21, 2022
Chrysler (fca Us, Llc)
Defect Description:
POWER TRAIN
Potential Consequences:
Previous FCA campaign #U30 of solonoid pack for transmission 68rfe has been completed in 2018 and in June of 2022 a transmission service technician stated the one from the recall was faulty and needed replaced. Upon replacement with OEM solonoid pack the truck went into limp mode and was locked into 4th gear. Vehicle is undrivable and at the dealer. After further inspection the solonoid issue caused the clutch pack to shed debris into the bottom on the transmission pan which just had a new gasket, filters and fluid less than 20 miles ago. Transmission tech stated the debris was no there and saw no evidence of failure to the clutch pack prior to the replacement of the solonoid. Now transmission has to be rebuilt at owned expense. Vehicle has 72,000 miles and is not used for towing or aggressive driving.
Corrective Action:
Previous FCA campaign #U30 of solonoid pack for transmission 68rfe has been completed in 2018 and in June of 2022 a transmission service technician stated the one from the recall was faulty and needed replaced. Upon replacement with OEM solonoid pack the truck went into limp mode and was locked into 4th gear. Vehicle is undrivable and at the dealer. After further inspection the solonoid issue caused the clutch pack to shed debris into the bottom on the transmission pan which just had a new gasket, filters and fluid less than 20 miles ago. Transmission tech stated the debris was no there and saw no evidence of failure to the clutch pack prior to the replacement of the solonoid. Now transmission has to be rebuilt at owned expense. Vehicle has 72,000 miles and is not used for towing or aggressive driving.
Additional Notes:
Previous FCA campaign #U30 of solonoid pack for transmission 68rfe has been completed in 2018 and in June of 2022 a transmission service technician stated the one from the recall was faulty and needed replaced. Upon replacement with OEM solonoid pack the truck went into limp mode and was locked into 4th gear. Vehicle is undrivable and at the dealer. After further inspection the solonoid issue caused the clutch pack to shed debris into the bottom on the transmission pan which just had a new gasket, filters and fluid less than 20 miles ago. Transmission tech stated the debris was no there and saw no evidence of failure to the clutch pack prior to the replacement of the solonoid. Now transmission has to be rebuilt at owned expense. Vehicle has 72,000 miles and is not used for towing or aggressive driving.
Mfg Campaign: 11474197
Recall Date: Jul 15, 2022
Chrysler (fca Us, Llc)
Defect Description:
ENGINE
Potential Consequences:
I was driving my truck on the freeway pulling a loaded stock trailer. The truck suddenly down shifted into fourth gear and the engine RPM’s maxed out! I almost crashed the truck because the momentum of the trailer pushed the truck sideways on the freeway. I had to avoid traffic and get to the shoulder. Truck would not shift out of fourth gear and truck shifted into 4WD low also on its own. Had truck towed to dealers ship and was told a shift solenoid went out. Because of that they now have to change the torque converter and replace the transmission from the damaged it caused. It is unknown if it damaged any of the engine components at this time or any other parts of the drivetrain. Now I’m stuck paying for a transmission because Dodge didn’t put a safety backup into their system to prevent this in case of a failure. I see that I am not the first person it’s happened to by reading the power train comments for this year truck.
Corrective Action:
I was driving my truck on the freeway pulling a loaded stock trailer. The truck suddenly down shifted into fourth gear and the engine RPM’s maxed out! I almost crashed the truck because the momentum of the trailer pushed the truck sideways on the freeway. I had to avoid traffic and get to the shoulder. Truck would not shift out of fourth gear and truck shifted into 4WD low also on its own. Had truck towed to dealers ship and was told a shift solenoid went out. Because of that they now have to change the torque converter and replace the transmission from the damaged it caused. It is unknown if it damaged any of the engine components at this time or any other parts of the drivetrain. Now I’m stuck paying for a transmission because Dodge didn’t put a safety backup into their system to prevent this in case of a failure. I see that I am not the first person it’s happened to by reading the power train comments for this year truck.
Additional Notes:
I was driving my truck on the freeway pulling a loaded stock trailer. The truck suddenly down shifted into fourth gear and the engine RPM’s maxed out! I almost crashed the truck because the momentum of the trailer pushed the truck sideways on the freeway. I had to avoid traffic and get to the shoulder. Truck would not shift out of fourth gear and truck shifted into 4WD low also on its own. Had truck towed to dealers ship and was told a shift solenoid went out. Because of that they now have to change the torque converter and replace the transmission from the damaged it caused. It is unknown if it damaged any of the engine components at this time or any other parts of the drivetrain. Now I’m stuck paying for a transmission because Dodge didn’t put a safety backup into their system to prevent this in case of a failure. I see that I am not the first person it’s happened to by reading the power train comments for this year truck.
Mfg Campaign: 11466065
Recall Date: May 25, 2022
Chrysler (fca Us, Llc)
Defect Description:
POWER TRAIN
Potential Consequences:
I was driving my truck on the freeway pulling a loaded stock trailer. The truck suddenly down shifted into fourth gear and the engine RPM’s maxed out! I almost crashed the truck because the momentum of the trailer pushed the truck sideways on the freeway. I had to avoid traffic and get to the shoulder. Truck would not shift out of fourth gear and truck shifted into 4WD low also on its own. Had truck towed to dealers ship and was told a shift solenoid went out. Because of that they now have to change the torque converter and replace the transmission from the damaged it caused. It is unknown if it damaged any of the engine components at this time or any other parts of the drivetrain. Now I’m stuck paying for a transmission because Dodge didn’t put a safety backup into their system to prevent this in case of a failure. I see that I am not the first person it’s happened to by reading the power train comments for this year truck.
Corrective Action:
I was driving my truck on the freeway pulling a loaded stock trailer. The truck suddenly down shifted into fourth gear and the engine RPM’s maxed out! I almost crashed the truck because the momentum of the trailer pushed the truck sideways on the freeway. I had to avoid traffic and get to the shoulder. Truck would not shift out of fourth gear and truck shifted into 4WD low also on its own. Had truck towed to dealers ship and was told a shift solenoid went out. Because of that they now have to change the torque converter and replace the transmission from the damaged it caused. It is unknown if it damaged any of the engine components at this time or any other parts of the drivetrain. Now I’m stuck paying for a transmission because Dodge didn’t put a safety backup into their system to prevent this in case of a failure. I see that I am not the first person it’s happened to by reading the power train comments for this year truck.
Additional Notes:
I was driving my truck on the freeway pulling a loaded stock trailer. The truck suddenly down shifted into fourth gear and the engine RPM’s maxed out! I almost crashed the truck because the momentum of the trailer pushed the truck sideways on the freeway. I had to avoid traffic and get to the shoulder. Truck would not shift out of fourth gear and truck shifted into 4WD low also on its own. Had truck towed to dealers ship and was told a shift solenoid went out. Because of that they now have to change the torque converter and replace the transmission from the damaged it caused. It is unknown if it damaged any of the engine components at this time or any other parts of the drivetrain. Now I’m stuck paying for a transmission because Dodge didn’t put a safety backup into their system to prevent this in case of a failure. I see that I am not the first person it’s happened to by reading the power train comments for this year truck.
Mfg Campaign: 11466065
Recall Date: May 25, 2022
Chrysler (fca Us, Llc)
Defect Description:
SERVICE BRAKES
Potential Consequences:
A known issue is occurring across many vehicles where the ABS Braking system becomes non-working and illuminates the ABS - Service Electrical Braking System light along with disengaging the vehicle traction control. The part that needs to be replaced is on national backorder with no ETA of availability. In turn, this issue is causing my West Virginia State Vehicle Inspection to remain invalid as I cannot get a proper inspection due to the warning light. In addition, with the ABS not working, I am fearful of using my vehicle to transport my family, especially my toddler. This issue needs to be addressed by Chrysler Corp, but there have been no recalls nor even a TSB released referring to this issue. A quick search of Ram/Jeep/Dodge/Chrysler Forums shows that this is a very widespread issue affecting many vehicles. This presents a major safety issue, especially since it is considered an important safety feature preventing my vehicle from being inspected. This issue needs addressed ASAP by the company and repaired promptly.
Corrective Action:
A known issue is occurring across many vehicles where the ABS Braking system becomes non-working and illuminates the ABS - Service Electrical Braking System light along with disengaging the vehicle traction control. The part that needs to be replaced is on national backorder with no ETA of availability. In turn, this issue is causing my West Virginia State Vehicle Inspection to remain invalid as I cannot get a proper inspection due to the warning light. In addition, with the ABS not working, I am fearful of using my vehicle to transport my family, especially my toddler. This issue needs to be addressed by Chrysler Corp, but there have been no recalls nor even a TSB released referring to this issue. A quick search of Ram/Jeep/Dodge/Chrysler Forums shows that this is a very widespread issue affecting many vehicles. This presents a major safety issue, especially since it is considered an important safety feature preventing my vehicle from being inspected. This issue needs addressed ASAP by the company and repaired promptly.
Additional Notes:
A known issue is occurring across many vehicles where the ABS Braking system becomes non-working and illuminates the ABS - Service Electrical Braking System light along with disengaging the vehicle traction control. The part that needs to be replaced is on national backorder with no ETA of availability. In turn, this issue is causing my West Virginia State Vehicle Inspection to remain invalid as I cannot get a proper inspection due to the warning light. In addition, with the ABS not working, I am fearful of using my vehicle to transport my family, especially my toddler. This issue needs to be addressed by Chrysler Corp, but there have been no recalls nor even a TSB released referring to this issue. A quick search of Ram/Jeep/Dodge/Chrysler Forums shows that this is a very widespread issue affecting many vehicles. This presents a major safety issue, especially since it is considered an important safety feature preventing my vehicle from being inspected. This issue needs addressed ASAP by the company and repaired promptly.
Mfg Campaign: 11459812
Recall Date: Apr 6, 2022
Chrysler (fca Us, Llc)
Defect Description:
POWER TRAIN
Potential Consequences:
The contact owns a 2016 Ram 2500. The contact stated while the vehicle was parked and running, she opened the front driver's side door and stepped on the running board with her body between the front driver's side door and the vehicle frame. The vehicle lunged forward independently, turned to the left and crashed into the front end of the passenger's side of the unoccupied vehicle parked next to it. The contact became trapped between the two vehicles and pinned between the driver's side door and the frame of her vehicle. The contact stated that the vehicle was squeezing continuously as if it had shifted into drive. The contact attempted to honk the horn by extending the keys on her left arm but was unsuccessful and started screaming for help. Two individuals arrived at the scene but could not unlock the door and were unable to break the front passenger's side window to unlock the door in order to extract the contact. The contact squeezed her body and reached out the unlock button on the driver's side door, and she unlocked the door. One of the individual got inside the vehicle, shifted into reverse and reversed slowly in order to release and extract the contact. The vehicle was parked. The contact was then extracted but was knocked unconscious. The contact was airlifted to the hospital where she was informed that she had sustained six broken ribs, damaged clavicle required surgery, damaged lungs due to squeezing, squeezed organs to one side of her abdomen, bruises on both glutes and bruised hips. A police report was filed. The vehicle was towed to the local collision center. The collision center informed the contact that the driver's side frame of the vehicle she was squeezed against was dented, which showed the severity of the squeezing. The local Chrysler dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 72,000.
Corrective Action:
The contact owns a 2016 Ram 2500. The contact stated while the vehicle was parked and running, she opened the front driver's side door and stepped on the running board with her body between the front driver's side door and the vehicle frame. The vehicle lunged forward independently, turned to the left and crashed into the front end of the passenger's side of the unoccupied vehicle parked next to it. The contact became trapped between the two vehicles and pinned between the driver's side door and the frame of her vehicle. The contact stated that the vehicle was squeezing continuously as if it had shifted into drive. The contact attempted to honk the horn by extending the keys on her left arm but was unsuccessful and started screaming for help. Two individuals arrived at the scene but could not unlock the door and were unable to break the front passenger's side window to unlock the door in order to extract the contact. The contact squeezed her body and reached out the unlock button on the driver's side door, and she unlocked the door. One of the individual got inside the vehicle, shifted into reverse and reversed slowly in order to release and extract the contact. The vehicle was parked. The contact was then extracted but was knocked unconscious. The contact was airlifted to the hospital where she was informed that she had sustained six broken ribs, damaged clavicle required surgery, damaged lungs due to squeezing, squeezed organs to one side of her abdomen, bruises on both glutes and bruised hips. A police report was filed. The vehicle was towed to the local collision center. The collision center informed the contact that the driver's side frame of the vehicle she was squeezed against was dented, which showed the severity of the squeezing. The local Chrysler dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 72,000.
Additional Notes:
The contact owns a 2016 Ram 2500. The contact stated while the vehicle was parked and running, she opened the front driver's side door and stepped on the running board with her body between the front driver's side door and the vehicle frame. The vehicle lunged forward independently, turned to the left and crashed into the front end of the passenger's side of the unoccupied vehicle parked next to it. The contact became trapped between the two vehicles and pinned between the driver's side door and the frame of her vehicle. The contact stated that the vehicle was squeezing continuously as if it had shifted into drive. The contact attempted to honk the horn by extending the keys on her left arm but was unsuccessful and started screaming for help. Two individuals arrived at the scene but could not unlock the door and were unable to break the front passenger's side window to unlock the door in order to extract the contact. The contact squeezed her body and reached out the unlock button on the driver's side door, and she unlocked the door. One of the individual got inside the vehicle, shifted into reverse and reversed slowly in order to release and extract the contact. The vehicle was parked. The contact was then extracted but was knocked unconscious. The contact was airlifted to the hospital where she was informed that she had sustained six broken ribs, damaged clavicle required surgery, damaged lungs due to squeezing, squeezed organs to one side of her abdomen, bruises on both glutes and bruised hips. A police report was filed. The vehicle was towed to the local collision center. The collision center informed the contact that the driver's side frame of the vehicle she was squeezed against was dented, which showed the severity of the squeezing. The local Chrysler dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 72,000.
Mfg Campaign: 11456603
Recall Date: Mar 14, 2022
Chrysler (fca Us, Llc)
Defect Description:
AIR BAGS
Potential Consequences:
I was involved in a single vehicle accident due to a medical issue. I hit a utility pole, took out a cyclone fence, proceeded across a front yard of a home then almost directly into a block retaining wall. I was wearing my seat belt. My airbags did not deploy but I have no idea how fast I was going. From the damage to the pole and the wall and my truck I had to be going a decent speed. The police report noted that when they arrived my foot was on the accelerator and the back wheels were spinning for what that’s worth.
Corrective Action:
I was involved in a single vehicle accident due to a medical issue. I hit a utility pole, took out a cyclone fence, proceeded across a front yard of a home then almost directly into a block retaining wall. I was wearing my seat belt. My airbags did not deploy but I have no idea how fast I was going. From the damage to the pole and the wall and my truck I had to be going a decent speed. The police report noted that when they arrived my foot was on the accelerator and the back wheels were spinning for what that’s worth.
Additional Notes:
I was involved in a single vehicle accident due to a medical issue. I hit a utility pole, took out a cyclone fence, proceeded across a front yard of a home then almost directly into a block retaining wall. I was wearing my seat belt. My airbags did not deploy but I have no idea how fast I was going. From the damage to the pole and the wall and my truck I had to be going a decent speed. The police report noted that when they arrived my foot was on the accelerator and the back wheels were spinning for what that’s worth.
Mfg Campaign: 11456414
Recall Date: Mar 12, 2022
Chrysler (fca Us, Llc)
Defect Description:
UNKNOWN OR OTHER
Potential Consequences:
Fuel gauge not accurate, reporting half a tank when the tank is full. Fuel gauge not working appropriately. Truck has 47,000 miles.
Corrective Action:
Fuel gauge not accurate, reporting half a tank when the tank is full. Fuel gauge not working appropriately. Truck has 47,000 miles.
Additional Notes:
Fuel gauge not accurate, reporting half a tank when the tank is full. Fuel gauge not working appropriately. Truck has 47,000 miles.
Mfg Campaign: 11456287
Recall Date: Mar 11, 2022
Chrysler (fca Us, Llc)
Defect Description:
AIR BAGS
Potential Consequences:
There has been an open recall on this vehicle since August 2021. It was reported to be by the dealership this is at that this was due to have a remedy to fix the SABIC in the 4th Quarter of 2021. IT has yet to have a remedy pushed out. I was also told that the Y55 recall is grouped together with the Y63 Recall. I agreed with the dealership in October of 2021 that I would purchase this vehicle, and they told me the recall remedy would be out the following month. I have been patiently waiting with no resolution from RAM, MOPAR or Chrysler. I have contacted the dealership several times a week, and they keep telling my that MOPAR has been contact by them and they are not returning phone calls. This can not be sold until it is fixed, due to a Stop Sale Issued with the Recall Notice.
Corrective Action:
There has been an open recall on this vehicle since August 2021. It was reported to be by the dealership this is at that this was due to have a remedy to fix the SABIC in the 4th Quarter of 2021. IT has yet to have a remedy pushed out. I was also told that the Y55 recall is grouped together with the Y63 Recall. I agreed with the dealership in October of 2021 that I would purchase this vehicle, and they told me the recall remedy would be out the following month. I have been patiently waiting with no resolution from RAM, MOPAR or Chrysler. I have contacted the dealership several times a week, and they keep telling my that MOPAR has been contact by them and they are not returning phone calls. This can not be sold until it is fixed, due to a Stop Sale Issued with the Recall Notice.
Additional Notes:
There has been an open recall on this vehicle since August 2021. It was reported to be by the dealership this is at that this was due to have a remedy to fix the SABIC in the 4th Quarter of 2021. IT has yet to have a remedy pushed out. I was also told that the Y55 recall is grouped together with the Y63 Recall. I agreed with the dealership in October of 2021 that I would purchase this vehicle, and they told me the recall remedy would be out the following month. I have been patiently waiting with no resolution from RAM, MOPAR or Chrysler. I have contacted the dealership several times a week, and they keep telling my that MOPAR has been contact by them and they are not returning phone calls. This can not be sold until it is fixed, due to a Stop Sale Issued with the Recall Notice.
Mfg Campaign: 11454222
Recall Date: Feb 26, 2022
Chrysler (fca Us, Llc)
Defect Description:
SERVICE BRAKES
Potential Consequences:
It seems that this is a common problem on these trucks the HCU for the antilock braking system and the ABS module has to be replaced the traction control light comes on the ABS light comes on and the cruise control does not work.
Corrective Action:
It seems that this is a common problem on these trucks the HCU for the antilock braking system and the ABS module has to be replaced the traction control light comes on the ABS light comes on and the cruise control does not work.
Additional Notes:
It seems that this is a common problem on these trucks the HCU for the antilock braking system and the ABS module has to be replaced the traction control light comes on the ABS light comes on and the cruise control does not work.
Mfg Campaign: 11452853
Recall Date: Feb 18, 2022
Need Legal Help?
Featured Attorneys
Barry Edzant
Edzant Price LLC
Valencia, CA • 36 yrs
Focus: Lemon Law, Personal Injury