Complaints & Recalls
Official Safety Recalls - Important!
35 RecallsThese are official manufacturer recalls ordered by NHTSA for safety defects. If you own this vehicle, contact your dealer immediately for free repairs.
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Potential Risk:
FREE Recall Solution:
Mfg Campaign: 25TB06 / 25TA06
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Lexus LX600 vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 24TB07,24TA07,24LB04
Recall Date: May 30, 2024
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 24TA02, 24LA02
Recall Date: Feb 21, 2024
Southeast Toyota Distributors, Llc
Safety Issue:
Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Mfg Campaign: SET23B
Recall Date: Nov 9, 2023
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. The plastic fuel tube routed near metallic brake lines may chafe against the brake lines and become damaged, possibly resulting in a fuel leak.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 23TB09 / 23TA09
Recall Date: Aug 10, 2023
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles that may be equipped with a Toyota genuine accessory tonneau cover. The tonneau cover attachment joints may come loose and allow the cover to detach.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 23TB03 / 23TA03
Recall Date: Mar 3, 2023
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. A software error in the combination meter's electronic control unit (ECU) may cause the Instrument Panel LCD display to go blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 23TA02
Recall Date: Feb 22, 2023
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus NX250, NX350, and Toyota Tundra vehicles. The Skid Control ECU within the Brake Actuator Assembly may falsely detect an overcurrent condition of the Electronic Parking Brake (EPB) Actuator and enter a failsafe mode which prevents the EPB from being engaged. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 22TA11 and 22LA04
Recall Date: Sep 1, 2022
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. Incorrect programming of the parking-assist electronic control unit (ECU) software, may cause the front camera image to appear on the multimedia display instead of the rear camera image when the shifter is placed into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 22TA07
Recall Date: Jul 13, 2022
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles. The flange nuts on the axle shaft sub-assemblies can loosen over time and potentially cause one or both axle shaft sub-assemblies to separate from the axle housing.
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 22TA05
Recall Date: Jun 23, 2022
Toyota Motor Engineering & Manufacturing
Safety Issue:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra vehicles equipped with a Panoramic View Monitor (PVM) system. The parking assist electronic control unit (ECU) software may prevent transmission of the rearview camera signal during cold weather, preventing the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Potential Risk:
FREE Recall Solution:
Additional Details:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Mfg Campaign: 22TA04
Recall Date: Apr 28, 2022
Consumer Complaints
452 ComplaintsToyota Motor Corporation
Defect Description:
POWER TRAIN
Potential Consequences:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Corrective Action:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Additional Notes:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Mfg Campaign: 11595363
Recall Date: Jun 19, 2024
Toyota Motor Corporation
Defect Description:
ENGINE
Potential Consequences:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Corrective Action:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Additional Notes:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Mfg Campaign: 11595364
Recall Date: Jun 19, 2024
Toyota Motor Corporation
Defect Description:
FUEL/PROPULSION SYSTEM
Potential Consequences:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Corrective Action:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Additional Notes:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Mfg Campaign: 11595364
Recall Date: Jun 19, 2024
Toyota Motor Corporation
Defect Description:
POWER TRAIN
Potential Consequences:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Corrective Action:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Additional Notes:
At certain times, when coming to a stop, and then attempting to proceed, the throttle with delay or lag from a stop. This has happened since the start of ownership in Feb 2022 up until today. Toyota has issued on previous Technical Service Bulletin (TSB) - T-SB-0111-22 - that Toyota states should resolve an issue with "Hesitation From Stop and Surge Concerns". The TCM -Transmission Control Module - logic has been modiWed to address these conditions. According to Toyota, this updated logic SHOULD keep this from happening. This TSB was released December 16, 2022. To date, this issue continues to occur. The only way to keep it from happening is to Reset the TCM Learning. This requires the battery to be unplugged for an extended period of time. There was a subsequent TCM logic update for Recall 24TA02 (NHTSA Campaign Number 24V125000). It would seem that this TCM Logic Update has actually caused this condition to be present more often. This is something that we have expressed to our Service Consultant at every visit and it is still occurring over two years later. We have had this happen multiple times while attempting to proceed through a 4-way stop, as well as trying to merge into tra`c in slower moving city streets. There are members of an online forum who have been able to record the data aow and show when and how the delay occurs. Other than December 2022 TSB, Toyota has not acknowledged this issue even though it continues to occur on the MY22+ Tundra/MY23+ Sequoia, as well as the MY18+ Lexus LS 500. I am lead to believe this is a result of the programming for the Direct Shift 10- AT from Aisin/Toyota and/or the V35A-FTS, both Type '17 (LS 500) and the Type '21 (Tundra/ Sequoia).
Mfg Campaign: 11595364
Recall Date: Jun 19, 2024
Toyota Motor Corporation
Defect Description:
ENGINE
Potential Consequences:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Corrective Action:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Additional Notes:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Mfg Campaign: 11593822
Recall Date: Jun 12, 2024
Toyota Motor Corporation
Defect Description:
FUEL/PROPULSION SYSTEM
Potential Consequences:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Corrective Action:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Additional Notes:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Mfg Campaign: 11593822
Recall Date: Jun 12, 2024
Toyota Motor Corporation
Defect Description:
POWER TRAIN
Potential Consequences:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Corrective Action:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Additional Notes:
Vehicle failed to move forward or reverse from a stand still. Once vehicle is shutdown and restarted, the problem does not return. When vehicle was sent to dealer it couldn't be duplicated. If this issue occurs on the open road, it could cause a collision.
Mfg Campaign: 11593822
Recall Date: Jun 12, 2024
Toyota Motor Corporation
Defect Description:
SERVICE BRAKES
Potential Consequences:
Rotors have been replaced once already. Still vibrating severely during braking at 50-60 mph speeds. Especially downhill.
Corrective Action:
Rotors have been replaced once already. Still vibrating severely during braking at 50-60 mph speeds. Especially downhill.
Additional Notes:
Rotors have been replaced once already. Still vibrating severely during braking at 50-60 mph speeds. Especially downhill.
Mfg Campaign: 11593982
Recall Date: Jun 12, 2024
Toyota Motor Corporation
Defect Description:
FUEL/PROPULSION SYSTEM
Potential Consequences:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Corrective Action:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Additional Notes:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Mfg Campaign: 11593769
Recall Date: Jun 11, 2024
Toyota Motor Corporation
Defect Description:
ENGINE
Potential Consequences:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Corrective Action:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Additional Notes:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Mfg Campaign: 11593769
Recall Date: Jun 11, 2024
Toyota Motor Corporation
Defect Description:
POWER TRAIN
Potential Consequences:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Corrective Action:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Additional Notes:
In certain conditions, vehicle exhibiting unresponsive accelerator pedal. This appears to occur when vehicle is transitioning from a rolling stop to an acceleration condition. There is a 2-3 second delay and then the vehicle responds. T-SB-0111-22 has been applied to the vehicle, but condition remains This is causing an unsafe condition as one attempts to merge into traffic. Natural tendency is to apply more acceleration during these "dead pedal" conditions, and when power finally arrives, the vehicle lurches and sometimes will spin the tires. Numerous other people on forums have reported this condition and as of yet Toyota or Dealers have not been able to fix the problem
Mfg Campaign: 11593769
Recall Date: Jun 11, 2024
Toyota Motor Corporation
Defect Description:
ENGINE AND ENGINE COOLING
Potential Consequences:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Numbers: 23V566000 (Fuel System, Gasoline) and 24V381000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Numbers: 23V566000 (Fuel System, Gasoline) and 24V381000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Numbers: 23V566000 (Fuel System, Gasoline) and 24V381000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11593363
Recall Date: Jun 10, 2024
Toyota Motor Corporation
Defect Description:
FUEL SYSTEM, GASOLINE
Potential Consequences:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Numbers: 23V566000 (Fuel System, Gasoline) and 24V381000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Numbers: 23V566000 (Fuel System, Gasoline) and 24V381000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Numbers: 23V566000 (Fuel System, Gasoline) and 24V381000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Mfg Campaign: 11593363
Recall Date: Jun 10, 2024
Toyota Motor Corporation
Defect Description:
TIRES:TREAD/BELT
Potential Consequences:
Tire tread is cracking and breaking away in small chunks. The tires are OEM (Toyota Tundra 22') Bridgestone Dueler H/T 265/70R18 model 685 with manufacture date of 1022. I do not feel safe driving on these tires due to tread rubber breaking away even in the middle of the tire. All four tires show cracks but both rear tires are worse of the four. I have had regular service and tire rotation by Toyota dealership but they did not notify me of the issue. The truck has 17K on it and tires have plenty of tread depth. Location of truck is in the southwest and not is used in cold environment.
Corrective Action:
Tire tread is cracking and breaking away in small chunks. The tires are OEM (Toyota Tundra 22') Bridgestone Dueler H/T 265/70R18 model 685 with manufacture date of 1022. I do not feel safe driving on these tires due to tread rubber breaking away even in the middle of the tire. All four tires show cracks but both rear tires are worse of the four. I have had regular service and tire rotation by Toyota dealership but they did not notify me of the issue. The truck has 17K on it and tires have plenty of tread depth. Location of truck is in the southwest and not is used in cold environment.
Additional Notes:
Tire tread is cracking and breaking away in small chunks. The tires are OEM (Toyota Tundra 22') Bridgestone Dueler H/T 265/70R18 model 685 with manufacture date of 1022. I do not feel safe driving on these tires due to tread rubber breaking away even in the middle of the tire. All four tires show cracks but both rear tires are worse of the four. I have had regular service and tire rotation by Toyota dealership but they did not notify me of the issue. The truck has 17K on it and tires have plenty of tread depth. Location of truck is in the southwest and not is used in cold environment.
Mfg Campaign: 11593237
Recall Date: Jun 8, 2024
Toyota Motor Corporation
Defect Description:
ENGINE
Potential Consequences:
Drove the truck to the store, upon starting it to leave the engine had a loud knocking and whining sound (the truck has only 38xxx miles). I drove directly across the street to the dealership who looked and listened to it and was then told that because there was no engine light on, I would have to make an appointment for later on the following week. They then told me because the engine light was not on that I would be fine to drive home. I did question this several times and was reassured that as long as I did not "gas it" I would be okay to drive it. On the ride home, my truck power kept surging, the entire truck was shaking due to the rough idle and the engine smelt like it was very hot. I did end up towing my truck to a different Toyota dealership that agreed to look at it. The truck is no longer drivable. This is the 10th recall on this truck.
Corrective Action:
Drove the truck to the store, upon starting it to leave the engine had a loud knocking and whining sound (the truck has only 38xxx miles). I drove directly across the street to the dealership who looked and listened to it and was then told that because there was no engine light on, I would have to make an appointment for later on the following week. They then told me because the engine light was not on that I would be fine to drive home. I did question this several times and was reassured that as long as I did not "gas it" I would be okay to drive it. On the ride home, my truck power kept surging, the entire truck was shaking due to the rough idle and the engine smelt like it was very hot. I did end up towing my truck to a different Toyota dealership that agreed to look at it. The truck is no longer drivable. This is the 10th recall on this truck.
Additional Notes:
Drove the truck to the store, upon starting it to leave the engine had a loud knocking and whining sound (the truck has only 38xxx miles). I drove directly across the street to the dealership who looked and listened to it and was then told that because there was no engine light on, I would have to make an appointment for later on the following week. They then told me because the engine light was not on that I would be fine to drive home. I did question this several times and was reassured that as long as I did not "gas it" I would be okay to drive it. On the ride home, my truck power kept surging, the entire truck was shaking due to the rough idle and the engine smelt like it was very hot. I did end up towing my truck to a different Toyota dealership that agreed to look at it. The truck is no longer drivable. This is the 10th recall on this truck.
Mfg Campaign: 11592906
Recall Date: Jun 6, 2024
Toyota Motor Corporation
Defect Description:
ENGINE
Potential Consequences:
Traveling on interstate with cruise control set. 55,xxx miles. Engine abruptly stopped running. Display indicated "engine stopped. Please stop vehicle immediately". Safety concern: Vehicle would not re-start to get off the interstate. Towed to dealer. Dealer acknowledges engine is blown. Toyota guidance is to rebuild engine from parts only. Short block, turbos, heads, coolers, etc. Unacceptable. Complete assembly replacement is more cost effective for manufacturer and dealer both. Note: There were no codes displayed or other indication prior to the abrupt failure.
Corrective Action:
Traveling on interstate with cruise control set. 55,xxx miles. Engine abruptly stopped running. Display indicated "engine stopped. Please stop vehicle immediately". Safety concern: Vehicle would not re-start to get off the interstate. Towed to dealer. Dealer acknowledges engine is blown. Toyota guidance is to rebuild engine from parts only. Short block, turbos, heads, coolers, etc. Unacceptable. Complete assembly replacement is more cost effective for manufacturer and dealer both. Note: There were no codes displayed or other indication prior to the abrupt failure.
Additional Notes:
Traveling on interstate with cruise control set. 55,xxx miles. Engine abruptly stopped running. Display indicated "engine stopped. Please stop vehicle immediately". Safety concern: Vehicle would not re-start to get off the interstate. Towed to dealer. Dealer acknowledges engine is blown. Toyota guidance is to rebuild engine from parts only. Short block, turbos, heads, coolers, etc. Unacceptable. Complete assembly replacement is more cost effective for manufacturer and dealer both. Note: There were no codes displayed or other indication prior to the abrupt failure.
Mfg Campaign: 11592739
Recall Date: Jun 5, 2024
Toyota Motor Corporation
Defect Description:
ENGINE
Potential Consequences:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Number: 24V381000 (Engine) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while her husband was driving 65 MPH, the vehicle stalled. The contact's husband pulled the vehicle over to the shoulder of the roadway. The contact's husband turned off and restarted the vehicle. The vehicle was driven to the destination. The contact stated that the failure occurred while the contact's husband was driving on a busy six-lane highway. The vehicle was taken to the dealer however, the failure could not be duplicated. The vehicle was not repaired. The contact stated that the failure had occurred two years ago but had not since reoccurred. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 2,000. VIN tool confirms parts not available.
Corrective Action:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Number: 24V381000 (Engine) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while her husband was driving 65 MPH, the vehicle stalled. The contact's husband pulled the vehicle over to the shoulder of the roadway. The contact's husband turned off and restarted the vehicle. The vehicle was driven to the destination. The contact stated that the failure occurred while the contact's husband was driving on a busy six-lane highway. The vehicle was taken to the dealer however, the failure could not be duplicated. The vehicle was not repaired. The contact stated that the failure had occurred two years ago but had not since reoccurred. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 2,000. VIN tool confirms parts not available.
Additional Notes:
The contact owns a 2022 Toyota Tundra. The contact received notification of NHTSA Campaign Number: 24V381000 (Engine) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while her husband was driving 65 MPH, the vehicle stalled. The contact's husband pulled the vehicle over to the shoulder of the roadway. The contact's husband turned off and restarted the vehicle. The vehicle was driven to the destination. The contact stated that the failure occurred while the contact's husband was driving on a busy six-lane highway. The vehicle was taken to the dealer however, the failure could not be duplicated. The vehicle was not repaired. The contact stated that the failure had occurred two years ago but had not since reoccurred. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 2,000. VIN tool confirms parts not available.
Mfg Campaign: 11592097
Recall Date: Jun 3, 2024
Toyota Motor Corporation
Defect Description:
WHEELS
Potential Consequences:
Apparently widespread issue with uneven tire wear. I know multiple owners with the same issue despite rotating tires even 5k miles (myself included. They did apparently correct the issues with the trd pro but have failed to solve it for the rest of the line up. Much more wear on the outer aspects of the tires.
Corrective Action:
Apparently widespread issue with uneven tire wear. I know multiple owners with the same issue despite rotating tires even 5k miles (myself included. They did apparently correct the issues with the trd pro but have failed to solve it for the rest of the line up. Much more wear on the outer aspects of the tires.
Additional Notes:
Apparently widespread issue with uneven tire wear. I know multiple owners with the same issue despite rotating tires even 5k miles (myself included. They did apparently correct the issues with the trd pro but have failed to solve it for the rest of the line up. Much more wear on the outer aspects of the tires.
Mfg Campaign: 11591282
Recall Date: May 29, 2024
Toyota Motor Corporation
Defect Description:
ENGINE
Potential Consequences:
When accelerating from a stop or rolling stop the truck has a dangerous throttle lag. I have addressed this to dealership but no solutions they just put it in the notes. It has been an ongoing problem I’ve had with the truck since I bought new. It has put me in many dangerous situations
Corrective Action:
When accelerating from a stop or rolling stop the truck has a dangerous throttle lag. I have addressed this to dealership but no solutions they just put it in the notes. It has been an ongoing problem I’ve had with the truck since I bought new. It has put me in many dangerous situations
Additional Notes:
When accelerating from a stop or rolling stop the truck has a dangerous throttle lag. I have addressed this to dealership but no solutions they just put it in the notes. It has been an ongoing problem I’ve had with the truck since I bought new. It has put me in many dangerous situations
Mfg Campaign: 11591147
Recall Date: May 28, 2024
Toyota Motor Corporation
Defect Description:
SERVICE BRAKES
Potential Consequences:
When you pass other vehicle on the hwy way break malfunction light come on and lock the back wheels. first time toyota call me for check up and they change spark plug and charge me more than $600. It happen next time and they call me for check up. i went to toyota and show my video and picture about break malfunction. they charge me for diagnosis $189 and found nothing. It will very danger if I pass the one lane county road and malfunction my break system So far no accidents, Ihave video and picture of dash board. date ,time and place that occurred. also receipts from toyata. thank you
Corrective Action:
When you pass other vehicle on the hwy way break malfunction light come on and lock the back wheels. first time toyota call me for check up and they change spark plug and charge me more than $600. It happen next time and they call me for check up. i went to toyota and show my video and picture about break malfunction. they charge me for diagnosis $189 and found nothing. It will very danger if I pass the one lane county road and malfunction my break system So far no accidents, Ihave video and picture of dash board. date ,time and place that occurred. also receipts from toyata. thank you
Additional Notes:
When you pass other vehicle on the hwy way break malfunction light come on and lock the back wheels. first time toyota call me for check up and they change spark plug and charge me more than $600. It happen next time and they call me for check up. i went to toyota and show my video and picture about break malfunction. they charge me for diagnosis $189 and found nothing. It will very danger if I pass the one lane county road and malfunction my break system So far no accidents, Ihave video and picture of dash board. date ,time and place that occurred. also receipts from toyata. thank you
Mfg Campaign: 11590038
Recall Date: May 21, 2024
Need Legal Help?
Featured Attorneys
Barry Edzant
Edzant Price LLC
Valencia, CA • 36 yrs
Focus: Lemon Law, Personal Injury